Industrial Security - Fire Alarms and Hazardous Area Industrial Security
Since 2001
Hazardous Area, Audiovisual Signaling, Fire Alarms



TESTING EQUIPMENT FOR DETECTORS

Aerosol Smoke Detectors Tester
Smoke Detectors Tester
Our Reference:
SPR1
Dispenser Type Spray
Flammable No
Volume 250 mL
Weight ~300 g
Approvals UL
  • Suitable for ionic and optical smoke detectors
  • Does not conduct electricity, is noncorrosive and leaves no residue.
  • Produces particles of 0.01 to 10 microns.
  • Use manually or with a specific tool
  • Contains no CFCs or HCFCs
Data Sheet Industrial Security PDF Logo SPR1 (693 KB)

Aerosol CO Detectors Tester
CO Detectors Tester
Our Reference:
SPR2
Dispenser Type Spray
Flammable No
Volume 250 mL
Weight ~40 g
Approvals UL

In the same way that smoke detectors need to be regularly tested, it is also important to test system-connected CO detectors. Legislation governing CO detectors is changing, many countries already require the installation of CO detectors.

  • Genuine, safe and non-flammable CO gas
  • Fast test and re-set times
  • Controllable
  • Designed for use with system-monitored CO detectors

Leak Detector Spray
Leak Detector Spray
Our Reference:
SPR3
Dispenser Type Spray
Flammable No
Volume 300 mL
Directives EC Directives: 1999/45/EC; 91/155/ECC; 91/1/EC; Council Directive 75/324/EEC
  • Suitable for use with most gases
  • Can be used with most type of refrigerant gases
  • Low chlorine content, ensuring maximum plastic compatibility
  • Compatible with most metals and plastics
  • Supplied in a convenient aerosol format to ensure consistent and accurate application
  • No wastege or spillage

Telescopic Access Pole
Telescopic Access Pole

USAGE EXAMPLE:  DT100 WITH DT330
Our Reference:
DT100
Max Length 4,54 m (14,9 ft)
Min Length 1,46 m (4,8 ft)
Weight ~1,6 kg
  • Allows the installation, replacement and testing of fire detectors in high ceilings
  • Extremely lightweight, quick and easy to extend to any heigth
  • Compatible with all DT head units (DT200, DT330 and DT461)
  • Extends from 4,8 ft to 14,9 ft in four sections - allowing access to approx. 20 ft
  • Can be used with up to 3 x DT101 poles to allow total reach of approx. 30 ft
  • Poles are subjected to rigorous conductivity testing to ensure the integrity of the insulating materials

Extension Pole for DT100
Extension Pole
Our Reference:
DT101
Length 1,19 m (3,9 ft)
Weight ~0,1 kg
  • Allows the installation, replacement and testing of fire detectors in high ceilings
  • Extension pole for DT100
  • Use up to 3 x DT101 each time to get a longer range
  • The set DT100 + 3 x DT101 allows access up to 9,14 m (30 ft)
  • Extremely lightweight, quick and easy to extend to any heigth
  • Compatible with all DT head units (DT200, DT330 and DT461)
  • Poles are subjected to rigorous conductivity testing to ensure the integrity of the insulating materials

Detector Removal / Replacement Tool
Detector Removal Tool
Our Reference:
DT200
Weight ~1,3 kg

Allows the installation and removal of fire detectors in high ceilings.

Faced with a vast array of different models shapes and sizes the professional needs an universal tool. Compatible with an astonishingly wide range of detectors, the colour-coded heads of the DT200 rotate to provide a combination of sizes and settings for just about every detector.

  • Universal design suits widest range of detectors
  • Lightweght
  • Outstanding quality backed by lifetime warranty
  • Suitable for use at / from angles

Aerosol Dispenser
Aerosol Dispenser
Our Reference:
DT330
Weight ~0,7 kg

Test smoke detectors in high ceilings using the spray SPR1 with this tool.

Fundamental to functional smoke checking for many professionals around the world, the DT330 contains the test aerosol and ensures that it is applied correctly and contained only where required. Used with the access poles it enables safe testing at heights but is equally valued at low level.

  • Suitable for use with SPR1
  • Universal design suits widest range of detectors (up to 100 mm in diameter)
  • Lightweight and simple to use
  • Transparent test cup for clear view of detector LED
  • Swing frame for use at / from angles
  • Outstanding quality backed by lifetime warranty

Cordless Heat Detector Tester
Heat Detector Tester
Our Reference:
DT461
Weight ~0,6 kg

The DT461 offers a unique method for testing heat detectors. The patented design offers true convenience while enabling the fastest functional test possible in the safest and most controlled manner.

Each DT461 comes complete with 2 battery batons that fit inside the DT poles and a charger which may be used in either an outlet or in-car. Using CAT - Cross Air Technology - air is heated and blown across the cup, which means the heat source is directed at the sensor, not the plastic components or casing. For battery conservation, the tool does not begin to operate until the detector breaks the infra-red beam in the cup.

  • Battery powered - UL Listed charger supplied
  • Suits fixed temperature, rate-of-rise and combination detectors up to 90 C
  • Directs heat straight at detector for rapid activation
  • Rechargeable - even from vehicle




Industrial Security E-mail
info@indsecurity.com
Industrial Security Skype
alarmestucano

Address: 3586, Desembargador Antonio de Paula St. - Curitiba - PR - Brazil

Phone/Fax: +55 41 3287-1364 or +55 41 4063-9687


Under construction
Contact us for more products!